5V 2A DC UPS Module for Raspberry Pi and Router Camera

Description

DC UPS 5V 2A high-power uninterruptible power supply module, With 4 levels of power indication, output overload protection, short circuit protection, chip overheat protection, battery over discharge protection, suitable for all types of 5V routers, switches, camera attendance machine power supply, and EPS version for lighting power supply or equipment charging! (The color display LED color sample is shipped randomly)

Warning: When connecting a non-powered battery, the capacity should not be lower than 3000mA. When the battery is not fully loaded, the lower limit of the capacity can be reduced. Otherwise, the battery may be overloaded and cause a fire!

The connection line of the battery to the motherboard should not be lower than 20AWG or 0.5 square. The length of the single wire should be controlled within 10cm. The output of the power supply should not be too long. It is recommended to be less than 20CM!

Version: The UPS version is used for continuous power supply, charging and discharging seamlessly. The EPS version is used for emergency power supply with a few seconds of switching time!

Regarding the heat issue: UPS products cannot be used at full load, because the battery voltage will drop, so the power should not exceed 60% when configuring the parameters, otherwise the temperature of the motherboard will be higher and the battery will be consumed quickly! , The motherboard heats about 30-40 degrees at light load, about 40-50 degrees at half load, and about 60-70 degrees at full load. If the battery is low, it will heat about 80-90 degrees at full load!

Please Refer Product Datasheet for more details.

Package Includes:

1 x 5V 2A DC UPS Module for Raspberry Pi and Router Camera