BBC Micro:Bit V2 GO Kit

Description

The micro: bit V2 is the new redesign of the already famous BBC micro: bit. With much more processing power with the new upgraded nRF52833 Processor, this new version brings with it more peripherals that you can experiment with in no time and with less wiring, such as a speaker, microphone, touch sensor and more. With the micro: bit you can do everything from small signs with the LED matrix, interesting tunes with the tone libraries, small autonomous robots, to weather stations.

The micro: bit V2 platform allows young students to learn programming and enter the world of electronics easily. With the MakeCode editor creating your programs is super easy. Just drag the blocks and load the program as if it were a USB stick.

This micro: bit Go Bundle provides you with everything you need to connect and power. This kit includes the V2 micro: bit, a short USB cable, an AAA battery holder, and 2 AAA batteries. Also inside the Go Bundle, you’ll find a Quick Start Guide with four unique ideas for getting started with micro: bit.

The Go Bundle is a fast and inexpensive way to start learning with your new micro: bit.

Features

• Onboard speaker
• MEMs Microphone with LED indicator
• Touch-sensitive logo
• Built-in sleep/off mode that means the board can be powered-down with batteries connected
• Discrete regulator that can supply up to 190mA of current to external accessories

Refinements

• Notched edge connector. To make it easier to connect things like crocodile clips and conductive thread
• Power LED indicator. In addition to the USB activity indicator, a power LED shows whether the micro:bit is powered on or off
• Gold plated antenna. To easily identify the radio/Bluetooth component

BBC MicroBit v2 Technical Specifications:

• 64 MHz ARM Cortex-M4 32 bit processor with floating point unit (FPU)
• 512KB Flash Memory
• RAM 128KB
• 5×5 Red LED Matrix
• 2 programmable buttons + a tactile logo
• MEMS microphone and LED power indicator
• Integrated temperature and light sensors, plus accelerometer, compass, and speaker
• 2.4 GHz radio to communicate micro: bits
• Bluetooth BLE 5.0 (2.4GHz ISM (Industrial, Scientific and Medical) 2.4GHz..2.41GHz)
• 25-pin comb connector for adding more sensors
• 4 dedicated GPIO pins for PWM, I2C, SPI, and external power
• Three digital / analog inputs / outputs accessible via alligator cables
• Two 3V / GND power rings
• Dedicated I2C port for peripherals
• MicroUSB connector (5V)
• JST-PH connector compatible with LiPo batteries (3V)
• Power / reset button with status LED
• 200 mA maximum current available for peripherals
• Programmable with C ++, MakeCode, Python and Scratch

More Details about the hardware.

Package Includes:

1 x BBC MicroBit Go V2 Tiny Computer

1 x USB Cable

2 x AAA Batteries

1 x Battery Holder

1 x User Guide