Pro Micro 5V 16Mhz ATmega32U4 Microcontroller compatible with Arduino

Description

This Pro Micro 5V 16M Microcontroller has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like.

This is the Compatible board based on Arduino Technology and not an official Arduino Board. You can purchase Original and Official Arduino Boards here.

There is a voltage regulator on board, so it can accept up to 12V DC.

The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

The Micro board is similar to the Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits.

Features :

1. ATMEGA32U4 running in 5V / 16MHz
2. Micro USB interface programming on the board
3. Four 10-bit ADC pin
4. 12 digital I / O (5 PWM capability)
5. Rx and Tx hardware serial connection.