0.96″ OLED Display Module – SPI/I2C – 128×64 (Blue)

Description

OLED Displays are sharp and energy efficient displays that doesn’t have a backlight. These displays are small in size with good resolution. So displaying a small text is visible without any pixellation. Because of these properties, it is used in battery operated devices, Printer Displays, etc. The term OLED stands for “Organic Light emitting diode” it uses the same technology that is used in most of our televisions but has fewer pixels compared to them.

This 0.96″ OLED Display Module offers 128×64 pixel resolution. They are featuring much less thickness than LCD displays with good brightness and also produce better and true colors. This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino project. The connection of this display with Arduino is made through the I2C(also called as IIC) serial or SPI interface.

Pin Details:

GND – Ground

VCC – Power Supply (3.3v – 5v)

D0 – Clock pin. Used for both I2C and SPI (also mentioned as SCK,SCL,CLK)

D1 – Data Pin Used for both IIC and SPI (also mentioned as SDA,MOSI)

RES – Reset Pin (used with SPI)

DC – Data Command (Used with SPI)

CS – Chip Select (Useful when more than one module is used under SPI)

Features :

• No need of the backlight
• The display is self-illuminating
• Power requirement is low
• They are offering the large viewing angle
• Full Compatible with Arduino
• Factory configured for SPI protocol (can easily change to IIC)
• Better performance characteristics than traditional LCD and LED displays.
• Only Need 2 I/O Port Control

Libraries:

1. Adafruit Library
2. GFX Graphics Library

Package Includes:

1 x 0.96″ OLED Display Module – SPI/I2C – 128×64 (Blue)