1Meter WS2812B 5V Addressable RGB LED Strip Light 60LED’s/Mtr.

Description

The 1Meter WS2812B 5V Addressable RGB LED Strip Light is extremely flexible, easy to use and each LED of the strip can be controlled separately by using Arduino or any microcontroller.

Each LED has been equipped with the integrated driver that allows you to control the color and brightness of each LED independently. The combined LED/driver IC on these strips is the extremely compact WS2812B (essentially an improved WS2811 LED driver integrated directly into a 5050 RGB LED), which enables higher LED densities.

The LED strip is divided into segments, with each segment containing one RGB LED. The strip can be cut apart on the lines between each segment to separate it into usable shorter sections. The data connection is labeled DO, Dout, DI, or Din, the positive power connection is labeled 5V, and the ground connection is labeled GND.

It can also be chained together, make sure to provide proper power.

Note: The LED Strip is non-waterproof.

• Installation surface must be smooth, clean and dry
• The part of LED components cannot be fixed on the surface of the sharp edges
• The strip should not be collided or crushed
• The strip can be cut following the cutting lines
• 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel
• The one-wire digital control interface
• Each RGB LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness
• Power/data connectors on both the ends of strips for easy chaining and the input side includes an additional power and ground wire for alternate power connections.

Specifications:

• Model: BTF-5V-60L-W
• Strip Length (Meter): 1 Meter
• Strip Color: White
• Width (mm): 12mm
• Input Supply Voltage (VDC): 5V
• Maximum Power (W): 90 Watts
• Operating Temperature (°C): -25°C to +60°C

Package Includes:

1 x 1Meter WS2812B 5V Addressable RGB LED Strip Light 60LED’s/Mtr.