LiFePo4 4S 12.8V 20A BMS with Temperature Sensor (Waterproof)

Description

4 Series 20 Amp BMS for Lithium Ferro Phosphate batteries 4×3.2Volt = 12.8V (Nominal Voltage) with Temperature Protection NTC Sensor. The LiFePO4 Batteries are 3.2V hence it needs a BMS built for that. A BMS is battery management system that monitors battery health and disconnect the battery during unsafe working conditions like overcharge, over discharge. This BMS has NTC (Thermistor) for temperature protection.

Note: Waterproof protection is for circuit board only. Do not let your battery or exposed terminals in water as it may cause harm and can damage the battery.

Specifications:

• Model: LFP 04S20A
• Supported Battery Type: LiFePO4 3.2Volt Cells
• No. of Cells in Series: 4
• Overcharge Detection Voltage: 4.25V±0.05V
• Over-Charge release voltage: 4.15V±0.05V
• Overcharge detection delay time: 1s
• Over-discharge detection delay time: 1s
• Overcharge Detection Voltage: 2.7V±0.1V
• Single over-discharge release voltage: 3V±0.1V
• Max Continuous Discharge Current: 20A
• Max Continuous Charging Current: 10A
• Balance Current: 30mA
• Balance Detect Voltage: 4.18
• Dimensions: 59x34x9mm

Resources:

What is mAh, C Ratings and Watt Hours in Batteries?

Series and Parallel in batteries

DIY 12 Volt LiFePO4 Battery Pack with 4S BMS – Lithium FerroPhosphate

Package Includes:

1 x LiFePo4 4S 12.8V 20A BMS with Temperature Sensor (Waterproof)

1 x Battery Monitoring Cable