Basic Ardupilot APM and Flysky CT6B Quadcopter Kit

Description

Build your own quadcopter by using Basic APM 2.8 Combo Kit which will help you to build your drone easier with the required and compatible hardware. Using Basic APM 2.8 combo kit you will get all the products in one package which saves your money and time.

Note: Battery is not included. You need to purchase it separately. Recommended battery type for this kit is 3S (11.1v) LiPo Battery. The mAh in battery determines the flight time so choosing a higher mAh increases the flying time but also note that, it will increase the weight of your drone. Various LiPo Batteries are available here.

Specification :

APM 2.8 :

• Model: APM 2.8
• Input Voltage (V): 12-16 V.
• Processor: ATMEGA2560 and ATMEGA32U-2
• Dimensions (mm) LxWxH: 70 x 45 x 15.
• Micro SD card slot: No.
• 3-AxisGyrometerAccelerometer
• High-performance Barometer

APM power module :

• Maximum input voltage of 18V (4S lipo)
• Maximum of 90 Amps (but only capable of measuring up to 60 Amps)
• Provides 5.37V and 2.25Amp power supply to the autopilot

Simonk 30A ESC:

• This 30 amp ESC for BLDC has onboard BEC.
• This ESC comes with a male dean T-connector.
• Auto Low BATTERY Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell lipo.
• APPLICATION: Multirotors, Rc Airplanes, etc.
• This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv)

A2212 BLDC Brushless motor :

• Number of cells: 2-3s Lipo
• Maximum efficiency current: 6-12A (·>75%) No load current (10v): 0.7A
• Maximum current: 16A/60
• Maximum efficiency: 78%
• Internal resistance: 65mΩ
• Poles: 14
• Maximum watts: 180W
• Motor bolt pattern (back of motor): 16mm x 19mm (hole to hole)
• X-mount hole pattern: 32mm x 32mm (hole to hole)
• Dimensions Motor size: 27.5mm x 30mm
• Shaft size: 3.17mm
• Weight: 47g

F450 Frame :

FS-CT6B TX and RX

• Channels: 6
• Frequency: 2.4GHz
• Type 2 remote control. (Throttle on the left side)
• Transmitter power: 0.8W
• Requires 8 AA size batteries
• Four model memory
• Computer programmable
• USB programming cable and program CD included 

B3 AC charger :

• Input Voltage: 110-240 V AC
• Output Current: 3× 700 mA
• Display: 3× Bicolor LED Max.
• Charging Current: 3× 850 mA
• Size: 100 mm * 60mm * 35mm
• Battery : 2-3s lipo
• Weight: 180 g

Kit includes :

Your suggestions are welcome. If you need any additional products that can make this kit better, we will consider your suggestion on upgrading the kit. Please leave us your thoughts in comments or in the email.