MAX30100 Pulse Oximeter Heart Rate Sensor Module

Description

The MAX30100 is an integrated pulse oximetry and heartrate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals. The MAX30100 operates from 1.8V and 3.3V power supplies and can be powered down through software with negligible standby current, permitting the power supply to remain connected at all times.

Note: Need to use 4.7K Ohm Pullup resistors on SCL and SDA Pins (SCL – 4.7K Ohm – VCC) (SDA – 4.7K Ohm – VCC) as because the board is designed for used with another board that consists of pull up resistor on it. We included the 4.7K Ohm Resistor if you are going to use it for prototyping purpose with Arduino Microcontrollers.

Applications

• Wearable Devices
• Fitness Assistant Devices
• Medical Monitoring Devices

Benefits and Features

• Complete Pulse Oximeter and Heart-Rate Sensor
• Solution Simplifies Design
• Integrated LEDs, Photo Sensor, and
• High-Performance Analog Front -End
• Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically
• Enhanced System-in-Package
• Ultra-Low-Power Operation Increases Battery Life for
• Wearable Devices
• Programmable Sample Rate and LED Current for
• Power Savings: Ultra-Low Shutdown Current (0.7µA, typ)
• Advanced Functionality Improves Measurement
• Performance: High SNR Provides Robust Motion Artifact Resilience
• Integrated Ambient Light Cancellation
• High Sample Rate Capability: Fast Data Output Capability

Package Includes:

1 x MAX30100 Pulse Oximeter Heart Rate Sensor Module

Additional information